鄂式破碎機
- Phone：
- 07352831789
Introduce:
It can apply to the metallurgy, mining, cement, construction, corhart, quarries, railways, ceramic and chemical industries, and also use for breaking various materials with coarse (middle), breaking pressive strength less than 250MPa. This series of jaw-crasher have high broken rate, well-distributed size product, simple, reliable, and is easy to use for maintenance, and have low power consumption.
主要型號及技術參數（粗破）:
Main models and technical parameters (cruder crasher):
|
型號、規 |
給料口尺寸（寬×長）Measurement of material inlet(L×W)(mm) |
給料粒度Feed fraction(mm) |
排料口調整范圍Adjusting range of discharge gate (mm) |
主軸轉速Peed of main shaft(r/min) |
生產率Productivity(t/h) |
電機功率Power of motor(kw) |
外型尺寸(長×寬×高)Outside measurement(L×W×H)(mm) |
重量 |
|
PE150×250 |
150×250 |
≤125 |
10-40 |
250 |
1-3 |
5.5 |
896×746×935 |
1100 |
|
PE250×400 |
250×400 |
≤210 |
20-80 |
318 |
4-14 |
15 |
1430×1310×1340 |
2800 |
|
PE400×600 |
400×600 |
≤350 |
40-80 |
275 |
8-20 |
30 |
1700×1732×1655 |
6500 |
|
PE500×750 |
500×750 |
≤425 |
50-100 |
275 |
30-60 |
55 |
2030×1966×1920 |
11500 |
|
PE600×900 |
600×900 |
≤500 |
65-160 |
250 |
50-110 |
75 |
2248×2180×2373 |
16700 |
|
PE750×1060 |
750×1060 |
≤630 |
80-140 |
250 |
72-140 |
110 |
2531×2420×2783 |
25000 |
|
PE900×1200 |
900×1200 |
≤750 |
98-165 |
220 |
150-230 |
132 |
3135×2799×3260 |
42200 |
Main models and technical parameters (fine crasher):
|
型號規格 |
給料口尺寸（寬×長）Measurement of material inlet(L×W)(mm) |
給料粒度 |
排料口調整范圍Adjusting range of discharge gate(mm) |
主軸轉速Speed of main shaft(r/min) |
生產率Productivity(t/h) |
電機功率Power of motor(kw) |
外型尺寸(長×寬×高)Outside measurement(L×W×H)(mm) |
重量(不含電機) |
|
PEX150×750 |
150×750 |
≤120 |
10-40 |
320 |
5-16 |
15 |
1380×1658×1025 |
3500 |
|
PEX250×1000 |
250×1000 |
≤210 |
15-50 |
330 |
10-32 |
37 |
1530×1992×1380 |
6500 |
|
PEX250×1200 |
250×1200 |
≤210 |
15-50 |
330 |
15-35 |
37 |
1530×2192×1380 |
7200 |
|
PEX350×1300 |
350×1300 |
≤250 |
20-90 |
300 |
20-85 |
75 |
2335×1800×1663 |
11000 |
|
PEX350×750 |
350×750 |
≤300 |
15-50 |
300 |
16-35 |
30 |
1535×1880×1596 |
6500 |
CONE CRUSHER
本系列破碎機適用于破碎中等以上硬度的各種礦石和巖石，具有結構可靠、生產效率高、調整方便、使用經濟等特點。其彈簧保險系統是過載保護裝置，可使異物鐵塊通過破碎腔而不害機器。采用干油或水兩種密封形式，使石粉與潤滑隔離，保證可靠工作。破碎腔型式由礦石用途決定，標準型適用于中碎；中型號適用于細碎；短頭型適用于細碎。
This series of crusher is used for crushing of ores and rocks, the advantages are: reliable structure, high efficiency, easy-to-adjust and economical. The safety spring system is the overload protection device, which makes foreign material goes through the machine without bring any hurt to it. The sealing modes are oil and water, which segregate the stone powder and lubricating system. The crushing chamber is decided by the purpose of ore, the standard model is suitable for medium crushing; the medium model is suitable for fine crushing and the short head model is suitable for fine crushing.
主要型號及技術參數:
MAIN MODELS AND TECHNICAL PARAMETERS:
|
型號Model |
破碎錐直徑Diameter of crushing cone（mm） |
最大給料尺寸Max. feeding size（mm） |
排料口寬度Width of discharge opening（mm） |
處理能力Processing capacity（t/h） |
電機功率Motor power（kw） |
高軸擺動次數Swing frequency of main shaft |
重量Weight（t） |
外形尺寸（長×寬×高）Dimensions(L×W×H) （mm） |
|
|
PYB |
600 |
600 |
65 |
12-25 |
40 |
30 |
356 |
5 |
2234×1370×1675 |
|
PYD |
|
|
35 |
3-13 |
12-23 |
|
|
5.5 |
2234×1370×1675 |
|
PYB |
900 |
900 |
115 |
15-50 |
50-90 |
55 |
333 |
11.2 |
2692×1640×2350 |
|
PTZ |
|
|
60 |
5-20 |
20-65 |
|
|
11.2 |
2692×1640×2350 |
|
PYD |
|
|
50 |
3-13 |
15-50 |
|
|
11.3 |
2692×1640×2350 |
|
PYB |
1200 |
1200 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790×1878×2844 |
|
PTZ |
|
|
100 |
8-25 |
42-135 |
|
|
25 |
2790×1878×2844 |
|
PYD |
|
|
50 |
3-15 |
18-105 |
|
|
25.3 |
2790×1878×2844 |
|
PYB |
1750 |
1750 |
215 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3910×2894×3809 |
|
PTZ |
|
|
185 |
10-30 |
115-320 |
|
|
50.3 |
3910×2894×3809 |
|
PYD |
|
|
85 |
5-13 |
75-230 |
|
|
50.2 |
3910×2894×3809 |
|
PYB |
2200 |
2200 |
300 |
30-60 |
59-1000 |
280-260 |
220 |
80 |
4622×3302×4470 |
|
PTZ |
|
|
230 |
10-30 |
200-580 |
|
|
80 |
4622×3302×4470 |
|
PYD |
|
|
100 |
5-15 |
120-340 |
|
|
81.4 |
4622×3302×4470 |
